Xycd60 Manual Jun 2026

Comprehensive Guide to the XY-CD60 Battery Charge/Discharge Controller Module

: Connect a charger to the input and a battery to the output. It stops charging when the upper voltage limit ( UP ) is reached.

: Typically 10A for the standard XY-CD60, though variants like the XY-CD63 support up to 30A. xycd60 manual

User Guide: XY-CD60 Battery Charge and Discharge Controller is a versatile digital battery control module designed to manage charging and discharging for batteries ranging from DC 6V to 60V

Locate the terminals marked for power (often labeled L , N , and Ground or simply AC ). User Guide: XY-CD60 Battery Charge and Discharge Controller

Forced turn-on time for discharge mode (0-10 seconds) [as per Scribd User Manual]. Save Settings: Long press the SET button for ≈is approximately equal to 5 seconds to save parameters and exit. 5. Wiring and Connections

Title: Understanding the XY-CD60 Voltage Controller: A Guide to Precision Battery Management 1. Introduction xycd60 manual

is and does not change voltage or limit current. It is a simple voltage controller that uses an onboard high-capacity relay to mechanically turn an external charger or load circuit on and off. Technical Specifications

While the logic supports 60V, ensure the current (Amps) of the charger or load does not exceed the relay's rated capacity (typically 10A-30A depending on the specific sub-model). 6. Conclusion

Lead-Acid, AGM, Gel, Lithium-Ion, LiFePO4, Ni-MH, Ni-CD. Interface and Button Functions

Allows for remote monitoring and parameter setting via a computer. Safety Protections: