: He restarted his PC and tapped Del to enter the BIOS. Under Power Management , he enabled Wake-On-LAN (sometimes called "Resume by PCI-E").
By implementing these security measures, you can enjoy the convenience of Wake-on-LAN without exposing your systems to unnecessary risks.
Here’s how AnyDesk specifically uses WoL: wake on lan anydesk hot
Because Wake on LAN relies on hardware-level interaction, your first step is enabling it in your computer's BIOS or UEFI settings.
You can power on a sleeping or completely shut-down computer from anywhere in the world by using the feature, provided there is at least one other active AnyDesk device online within the target local network . : He restarted his PC and tapped Del to enter the BIOS
: Open AnyDesk on the machine you want to wake. Go to Settings → Wake-on-LAN and select Enabled .
Set up a $15 Raspberry Pi on your home network that listens for a secure signal (e.g., from a Telegram bot). Send a message from your mobile hotspot → Pi sends magic packet → PC wakes → Connect with AnyDesk. Here’s how AnyDesk specifically uses WoL: Because Wake
Restart your target computer. Repeatedly press the setup key (usually F2 , F10 , F12 , or Del ) before Windows boots.
| Symptom | Likely Cause | Fix | |---------|--------------|-----| | No wake-up after shutdown | WoL only works from Sleep (S3) or Hibernate (S4), not full Shutdown (S5) on some PCs. | Disable Fast Startup in Windows (Power Options). | | Works on LAN but not remotely | Magic packet not routed. | Use VPN + local sender, or router’s built-in WoL page. | | NIC loses WoL after power loss | BIOS/OS setting not sticky. | Check BIOS "Wake from S5" options; re-apply OS settings. |