The Satlink WS-6933 firmware and software updates are typically performed via a USB connection
If the update was interrupted, the firmware may be corrupted. Try repeating the update process from Step 3; many Satlink upgrade tools can force a flash even if the device fails to boot completely. Manual Satellite Customization
Look for a new COM Port entry (e.g., Prolific USB-to-Serial or CH340 ). Note the assigned . 3. Flash the Firmware satlink ws6933 software update portable
Open your flashing tool, select the correct COM port, and load the new firmware file.
| Feature | Specification | |---|---| | | 2.1" TFT Positive Transflective LCD (240x320 pixels) | | Frequency Range | 950 ~ 2150 MHz | | Input Level | -65 ~ -25 dBm | | LNB Supply | 13V/18V, up to 300mA | | Battery | 7.4V / 800mAh Li-Ion | | Portability | Dimensions: 8x16x4 cm, Weight: 0.25kg | | Update Method | USB Port (USB to RS-232) | The Satlink WS-6933 firmware and software updates are
So, keep your USB cable handy, stay informed about new releases, and enjoy the confidence that comes with a perfectly aligned satellite dish and a fully up-to-date Satlink WS6933 in your hand.
Improves signal calculation accuracy and response time. Note the assigned
Check under . If a yellow exclamation mark appears, right-click and select Update Driver .
Always double-check that the file you are using is explicitly for the Satlink WS-6933 , not the WS-6906 or other models. Maintaining Your Portable Satlink WS-6933 To ensure your unit lasts beyond 2026:
| Device | Portability Level | Notes | |--------|------------------|-------| | Android phone + OTG cable | ★★★★★ | Best for field use. No laptop needed. | | Small Windows tablet | ★★★★☆ | Works well but requires more power. | | USB power bank + USB host adapter | ★★★☆☆ | Theoretical but rarely needed. | | Chromebook with USB support | ★★★☆☆ | Possible if ChromeOS allows file writing to FAT32. |
Once the progress bar reaches 100%, the software will display a "Success" or "Upgrade Complete" dialogue box. The Satlink WS-6933 will automatically reboot. Unplug the USB cable, navigate to the system settings menu on the meter, and check the firmware version number to confirm the update was successful. Troubleshooting Common Update Issues