: 4.5/5
Click on "Select," choose the L4260 model, and click "OK". Adjustment Mode: Click on "Particular adjustment mode."
| Issue | Fix | |-------|-----| | Tool doesn’t detect printer | Re-enter Service Mode, try different USB port | | Counter stays at 100% | Use a adjustment program (L4260 support added after v2.7) | | Ink leaks after reset | Pads are full → replace physically | reset l4260 verified
A prompt will appear stating: "Please turn off the printer." Press the physical power button on your to turn it off completely. Click on the computer screen. Turn the printer back on. Method 2: The Manual Hardware Service Mode Bypass
: Most third-party utility software is flagged as a false positive by Windows Defender. Temporarily pause your real-time protection and tamper protection shields. Step 2: Running the Adjustment Utility Download a verified Epson L4260 Turn the printer back on
The software will prompt you to turn off your printer. Turn it off, wait 10 seconds, and turn it back on.
In most cases, the physical pads can handle more ink, or can be easily replaced, but the digital counter must be reset using software. Step 2: Running the Adjustment Utility Download a
Resetting the software does not fix full pads. If your printer has had massive amounts of ink flushed, you may need to physically replace or clean the ink pads to avoid leaking on your desk.
Ensure the tool is specifically for the L-series (L4260/L4261). Using a tool for the L3150 or other models will fail.
This guide covers factory reset and basic troubleshooting for an L4260 device (assumed to be a consumer electronics device such as a router, printer, or similar). If your L4260 is a different product, the steps still apply as general reset procedures—adjust wording for your exact device.
This happens if you did not physically replace or clean the waste ink pad. The counter may have been reset to zero, but the physical pad is still full. When the printer runs a cleaning cycle, it adds to the pad and the counter quickly fills up again. The solution is to before or immediately after resetting the counter for a long-term fix.