Narishige Pc10 Manual New Jun 2026

The original PC-10 uses mains voltage inside the case. A modernized manual should include warnings about capacitor discharge and heater element replacement frequency.

Her phone buzzed. A message from New Lab Supplies: the PC-10 was discontinued. Lena’s fingers pressed the controller more tightly. The manual’s language—technician-forward, exacting—felt suddenly more intimate, a testament against obsolescence. It had been a tool for a generation of careful hands, each note in the margins a fingerprint: a tiny smear at “sterilize before use,” a pencil tick by “troubleshooting—air leak,” a dotted line connecting a page number to a memory.

Make sure the weights are properly attached and free to fall. 4. Operating the PC-10: Step-by-Step narishige pc10 manual new

Two-stage pulling capability (primary pull for thinning, secondary pull for tapering).

The Narishige PC-10 manual provides detailed technical specifications, including: The original PC-10 uses mains voltage inside the case

Keep the vertical slider tracks clean. Wipe them down with a lint-free cloth moistened with isopropyl alcohol. Do not use heavy oils, as they attract dust and cause friction.

Turn on the main power switch and allow the electronics to stabilize for 5 minutes. A message from New Lab Supplies: the PC-10 was discontinued

The Narishige PC-10 remains a workhorse in labs worldwide, long after its production has ended. While a "new" manual doesn't exist, the wealth of official information from Narishige's FAQs, combined with decades of shared user knowledge, provides all the guidance needed to operate, maintain, and troubleshoot this classic instrument. For many applications, the PC-10 is still the gold standard for pulling reliable and reproducible micropipettes. Understanding its core principles and knowing where to find support is the key to keeping this valuable tool running for years to come.

: The heater control uses a ten-turn adjusting knob for ultra-precise settings, allowing for tip sizes ranging from several tens of micrometers down to sub-micron levels.

For patch-clamp pipettes, standard weight configurations usually involve utilizing the light or medium weight set.