Transmitter Configuration

First of all the basic procedure. Below you will find examples of the most common connection variants.

create a new fixed-wing model in your transmitter
- If you want to create the new model as a helicopter, set the swashplate mode to H1, i.e. without a swashplate mixer. You do not need the throttle channel in the simulator, as you define the rpm in the model settings of the helicopter. The collective pitch channel is used as a throttle channel for wing models. The motor-off switch should switch its own channel. It must not influence any of the channels used for the 4 main control functions.
- In rare cases, the control signal is not transmitted smoothly to the computer. Then simply connect the USB adapter directly to the computer and not through a hub. This usually solves the problem.
remove all other joystick devices or usb simulator adapters
Connect the transmitter to the computer either directly or via a USB adapter. We recommend using wireless adapters such as the RX2SIM.
start neXt - CGM RC Flight Simulator
press esc and change to the settings > input device tab

The control input monitor window displays the raw control signal data. Up to 20 channels are possible depending on your dongle or adapter. Each function (collective pitch, rudder, aileron and elevator) should move a slider. If not, please follow the instructions below. nace sp0170 pdf 2021

then click on start calibration and follow the instructions there
select your stick mode also in settings > output device

Nace Sp0170 Pdf 2021 !new!

: While the core document was comprehensively revised in late 2018 ( NACE SP0170-2018 ), it remains a primary technical requirement referenced in standard industry compliance portfolios. The Mechanics of Polythionic Acid SCC (PTA SCC)

The wash solution must be maintained at a strict pH (typically >9is greater than 9

Since the official PDF is a copyrighted document, it is protected by intellectual property law and must be obtained through legitimate, authorized channels to ensure you have the complete, correct, and up-to-date version.

The standard highlights the need for properly selected materials, particularly stabilized grades of austenitic stainless steels (e.g., 321 or 347) which are more resistant to sensitization. Importance of the 2021/Updated Standard

: Maintaining a dry environment with air to ensure no liquid water is present to react with sulfur species. Material Selection

For new equipment designs, NACE SP0170 recommends evaluating chemically stabilized grades like 321 or 347 stainless steel, which resist sensitization during high-temperature operations.

AMPP - The Association for Materials Protection and Performance Key Mitigation Strategies