Motorola - Gm160 Programming Software
Ensure you have the license to operate on the frequencies you are programming.
Always click the "Read" icon first. This pulls the current codeplug (the radio's configuration file) from the device. Save a backup of this original file immediately. Step 2: Configure Conventional Channels
Software is useless without the right physical connection. The GM160 uses a proprietary 16-pin accessory connector on the rear. To interface this with a modern PC, you need two things: motorola gm160 programming software
Navigate to the top menu and select or Edit , then look for Preferences or Comm Port .
Before you start clicking, ensure you have the following hardware and software components ready: Customer Programming Software (CPS): , you typically need the Professional Radio CPS Ensure you have the license to operate on
Uses an RJ45-to-DB9 (Serial) or RJ45-to-USB cable. Rear Port: Often requires a multi-pin ribless cable.
Unlocking the Full Potential of Motorola GM160: A Comprehensive Guide to Programming Software Save a backup of this original file immediately
The software allows users to read the current configuration (codeplug) from the radio, modify settings, and write the new data back to the device. Key Functions of the CPS:
is required, which connects the radio's accessory port (or front mic jack, depending on the cable type) to your computer's USB or serial port. RIB (Radio Interface Box)
The official part number for this software is . This software is compatible with the entire Professional Series, including the GM140, GM160, GM340, GM360, GM380, GP140, and others. You might also find other compatible versions like ENLN4115U for radios like the GM340.
