. It was printed on yellowing paper that felt like dried skin.
The clock is exactly 1 hour off. Solution: You likely live in Arizona or Indiana (non-DST zones), or you forgot to flip the DST switch to "ON" or "OFF." Find the tiny switch labeled DST and flip it. The clock will fix itself within 1 hour.
If the clock is exactly one hour fast or slow following a seasonal time shift, ensure your DST switch is toggled to the appropriate ON or OFF position. Symptom 2: Signal Interference and Poor Reception kincaid radio controlled clock instruction manual
Before diving into settings, it is helpful to understand how your Kincaid clock works. It does not use the internet or Wi-Fi. Instead, it uses a built-in radio receiver tuned to a very low frequency (e.g., 60 kHz) broadcast by official atomic clocks, such as WWVB from Fort Collins, Colorado in the US, or MSF in the UK.
: Hold the button for rapid movement or press it repeatedly for minute-by-minute adjustments. Solution: You likely live in Arizona or Indiana
Before diving into the setup buttons, it helps to understand the technology inside your clock. The Atomic Signal (WWVB)
: Place a fresh AA alkaline battery into the compartment. Symptom 2: Signal Interference and Poor Reception Before
If the clock stops at an incorrect position (e.g., 1:00 or 5:00) and won't reset, the gears might be misaligned.
However, setting up a radio-controlled clock or restoring its signal after a battery change can sometimes be confusing. This comprehensive guide serves as your complete instruction manual to set up, operate, and troubleshoot your Kincaid radio-controlled clock. Section 1: Understanding How Your Kincaid Clock Works