Jis G 3193 Pdf <2025-2026>

JIS G 3193, titled "Dimensions, mass and permissible variations of hot rolled steel plates, sheets and strip," does not specify the chemical composition or mechanical properties of steel. Instead, it acts as a that applies to other material-specific standards.

Note: Buyers and manufacturers can mutually agree to restrict tolerances strictly to the plus (+) side or minus (-) side depending on custom fabrication criteria. 2. Width and Length Tolerances

The standard categorizes tolerances based on thickness, width, and length.

The standard meticulously details permissible variations in: jis g 3193 pdf

Often provides quick access to technical standards PDFs.

| Standard | Material Grade | |----------|----------------| | JIS G 3101 | SS400, SS490, etc. | | JIS G 3106 | SM400, SM490, etc. | | JIS G 3115 | SPV grades for pressure vessels | | JIS G 3116 | SG grades for gas cylinders | | JIS G 3136 | SN grades for building structures |

| Nominal Thickness (mm) | Tolerance for Width < 1600 mm | Tolerance for 1600-2000 mm | |------------------------|-------------------------------|-----------------------------| | 1.5 to 3.0 | ±0.20 mm | ±0.22 mm | | Over 3.0 to 6.0 | ±0.22 mm | ±0.35 mm | | Over 6.0 to 10.0 | ±0.35 mm | ±0.50 mm | | Over 10.0 to 16.0 | ±0.50 mm | ±0.70 mm | | Over 16.0 to 25.0 | ±0.70 mm | ±1.00 mm | JIS G 3193, titled "Dimensions, mass and permissible

For mill-edge or cut-edge products, width parameters dictate structural fitting. For precision cut-edged plates, the standard enforces rigorous limits:

This is for informational purposes only. For medical advice or diagnosis, consult a professional. AI responses may include mistakes. Learn more Share public link

Weight (kg)=Thickness (mm)×Width (m)×Length (m)×7.85Weight (kg) equals Thickness (mm) cross Width (m) cross Length (m) cross 7.85 JIS G 3101

A common point of confusion is the relationship between JIS G 3193, JIS G 3101, and the famous SS400 grade.

Note: For specific projects requiring higher precision, buyers can negotiate "restricted tolerances" with the steel mill. 2. Width Tolerances