Gunnebo Speedstile — Fl Installation Manual

Carefully slide the glass wing into the clamp mechanism. Two technicians are required for this step to prevent chipping or cracking.

Connect to the facility access control system to test authorization protocols. 5. Safety and Maintenance Tips

Run the synchronizing communication cable through the under-floor conduit from the Master to the Slave cabinet. gunnebo speedstile fl installation manual

Connect the relay output from your access control reader to Terminals GND and OPEN_A . A brief pulse ( ) will initiate a opening cycle.

Connect the secondary reader relay to GND and OPEN_B . Carefully slide the glass wing into the clamp mechanism

Route twisted-pair shielded cables (such as Cat5e or Cat6) for access control integration.

: Anchor bolts require a minimum depth of 70mm into concrete with a resistance of at least 30N/mm². A brief pulse ( ) will initiate a opening cycle

The manual mandates a rigorous site survey: