Includes updates to improve data transfer speeds and "open card" (initialization) yield.

Click the button on the right sidebar. A password prompt window will pop up; leave the password string field completely blank and press Enter or click OK to proceed. 4. Scan Profile Adjustments

: Click the Refresh button so the tool detects your drive in one of the numbered slots.

Insert your corrupted USB drive. The software should automatically detect it in one of the numbered slots.

Navigate to the "Setting" tab or gear icon. Ensure the password is left blank and confirm. The main distinction in configuration is whether to use "Sorting by Testing Socket" (for bare flash chips on a test fixture) or "Finished Product Opening Card" (for a completely assembled flash drive). For repairing an existing drive, select "Finished Product Opening Card" . In the settings, you can find "Optimization Mode" where you can choose "Capacity Priority", "Speed Priority", or "Stability Priority" based on your needs.

MpTools (Mass Production Tools) is specialized low-level software used by manufacturers to flash firmware onto USB controllers during production. Unlike standard Windows formatting, this tool communicates directly with the controller chip to bypass file system errors and repair hardware-level logic issues.

Using this tool will permanently erase all data on the USB drive.

: Use this for persistent hardware errors.

Return to the main screen and click the "Start" or "Begin" button. The MPTool will begin the process of low-level formatting and rewriting the firmware. This may take several minutes. Do not disconnect the drive during this process.

Try a USB 2.0 port instead of USB 3.0. Front-panel PC ports often provide unstable voltage; use the ports directly on the motherboard.

Inside the Settings configuration panel, navigate to the primary scanning tabs and modify your parameters based on the drive condition: