Select the action button on the upper-right control dock.
usbdev.ru : A comprehensive database for FirstChip firmware and MPTools.
FirstChip chipYC2019 USB Shows 0GB Capacity Issue - Elektroda firstchip chipyc2019
If a 1TB drive is writing at only 5-10 MB/s (USB 2.0 speeds), it's likely a fake. Check the price:
For Dead/Unrecognized Drives : Select . This performs a comprehensive wipe, completely restructures the bad sectors, and rebuilds the basic allocation path. Select the action button on the upper-right control dock
To repair a chipYC2019, you need a "Mass Production Tool" (MpTool). These are factory-level programs used to "re-burn" the firmware and map out bad blocks on the flash chip. Software Needed: FirstChip FC1178/FC1179 MpTools
If you suspect you have a drive powered by a ChipYC2019 (or similar spoofing controllers): Test immediately: (Windows) or (Mac/Linux). Watch the speed: Check the price: For Dead/Unrecognized Drives : Select
: Under the "Bin" tab, ensure the capacity matches your expected NAND flash size (e.g., 16000 for 16GB).
If ChipGenius explicitly identifies the hardware as a device, you are ready to proceed with the repair. Phase 2: Sourcing the Right FirstChip MPTool
当U盘出现物理损坏、固件丢失或逻辑错误时，借助芯片检测工具往往能帮助我们快速定位问题。用户在遇到此类主控的U盘故障时，通常会面临以下几种典型情形：
