Fanuc Series Oitf Plus Programming Manual !new!

Are you programming for a or a lathe (turning center) ?

G42 (Tool Right) G41 (Tool Left) =======> Direction =======> Direction [Tool] ---------------------- ---------------------- Workpiece [Tool] Workpiece

Cancel Canned Cycle. Never omit this , or subsequent coordinates will repeat the drilling motion. Lathe Turning Cycles (G70–G76) For turning applications on the 0i-F Plus: G71: Stock removal in turning (roughing cycle). G72: Stock removal in facing. G76: Threading cycle. 7. Macro B Programming Basics fanuc series oitf plus programming manual

P0400 : Depth of the thread profile (radius value, 400 ten-thousandths or 0.040"). Q0120 : Depth of the very first cut pass.

The G71 cycle removes material in linear steps parallel to the Z-axis (O.D. or I.D. turning). It uses a two-line block format on FANUC systems. G71 U0.1 R0.05 G71 P100 Q200 U0.02 W0.005 F0.012 Use code with caution. Are you programming for a or a lathe (turning center)

Tool compensates to the left of the programmed path (Climb milling).

Every program must begin and end with specific characters to ensure the CNC control reads it properly. Lathe Turning Cycles (G70–G76) For turning applications on

: Program Stop (Pauses the machine completely for manual inspection).

Tool nose radius/cutter compensation cancel, left, and right. G43 / G49: Tool length compensation enable and cancel. G54 to G59: Standard work coordinate systems. G90 / G91: Absolute and incremental programming modes. Critical Machine M-Codes M00 / M01: Program stop and optional program stop.