MediaTek PreLoader USB VCOM_V1632 driver is a critical software component used to establish a connection between a Windows PC and a MediaTek (MTK) powered mobile device. It is primarily required for firmware flashing, IMEI repairing, or unbricking devices using tools like SP Flash Tool Key Driver Information Driver Name: MediaTek PreLoader USB VCOM (Android). Hardware ID: USB\VID_0E8D&PID_2000 Commonly found as version 3.0.1504.0 (released Jan 2015) or 2.0.1136.0 Supported OS: Windows 7, 8, 8.1, 10, and 11 (both 32-bit and 64-bit). Driver Scape Manual Installation Steps
This indicates a physical hardware interference or a severely corrupted driver stack.
Connection Established. Baud Rate: 921600. Handshake Successful. driver mediatek usb port v1632 extra quality
Full support, but usually requires disabling Windows Driver Signature Enforcement before setup.
Choose . Click Show All Devices , then click Have Disk . MediaTek PreLoader USB VCOM_V1632 driver is a critical
: In modern repair scenarios (especially for newer security patches), this driver is often used alongside "Bypass" utilities to allow the SP Flash Tool to communicate with the chipset without being blocked by the device's bootloader security.
MediaTek USB Port V1632 / MediaTek PreLoader USB VCOM_V1632. Hardware ID: USB\VID_0E8D&PID_2000 Commonly found as version 3.0.1512.0 3.0.1504.0 Operating Systems: Driver Scape Manual Installation Steps This indicates a
Enables diagnostic ports required to restore network registration data.
MediaTek USB Port V1632 is a specific communication interface driver (COM/LPT) used to connect and flash firmware on MediaTek-based smartphones. It typically appears in Windows Device Manager when a device is in "Boot ROM" mode, a primary stage before the "Preloader" stage takes over for software installation. Technical Overview