Deckma Omd11 Manual [hot] 【500+ Easy】

utilizes light-scattering technology to distinguish between oil particles, solids, and water turbidity : 0–30 ppm (with trend indication up to 50 ppm). : Meets IMO MEPC.60 (33) standards.

The zero point can be adjusted on site by using clean water and entering the programming mode (Section 10.4 of the manual).

provides details on the 15 ppm alarm settings and IMO resolution compliance. Technical Datasheet: A technical overview and parts list can be found at Mackay Marine Key Technical Specifications Measurement Range 0 – 30 ppm (Trend indication up to 50 ppm) Meets IMO Resolution MEPC.60 (33) requirements Alarm Points deckma omd11 manual

24V AC/DC (Standard); 230V 50Hz versions available upon request Alarm Trip Points

The DECKMA OMD-11, though no longer in production, was a significant device in marine pollution control. Its ability to accurately monitor oil content in water, with improved solids suppression, was a step forward in environmental compliance. Operating it effectively requires a thorough understanding of its manual, regular maintenance, and the availability of technical support from the manufacturer or an authorized agent. By following the guidelines on operation, cleaning, and periodic calibration as detailed in the official manual, operators can ensure this legacy equipment continues to perform its critical function reliably. provides details on the 15 ppm alarm settings

Crankcase oil mist alarm sounds during maneuver.

2. Technical Specifications (According to the OMD-11 Manual) though no longer in production

According to most maritime regulations, the unit should be calibrated or checked by an authorized service provider every five years. 5. Troubleshooting Common Error Codes Go to product viewer dialog for this item. displays an error or fails to respond, check the following:

Run the outlet drain line directly to the bilge tank without backpressure. Electrical Connections

The is a 15 ppm bilge alarm monitor designed to accurately measure oil content in water, primarily for maritime use with oily water separators. While it is an older model replaced by newer units like the OMD-24 or OMD-2008, it remains widely used and fully supported for calibration and repairs. Core Capabilities