Beyond flash drives, Alcor Micro produces smart card readers using controllers like the AU9520 (SCR001), which may also be identified under the same vendor ID (VID 058F).
Head over to the community tech site USBDev Alcor Downloads to find tools.
(Next: related search suggestions invoked.)
If you were looking for a shorter, more casual version for a chat or status update: alcor micro unknown fa00 f w 3613 updated
Click the or Configuration button on the right side. If prompted for a security password, leave the field blank and hit enter. Select the default AlcorMP.ini profile template.
Once complete, the designated slot box will turn vibrant green and display the new formatted capacity of the drive.
For the majority of logical and firmware-related issues, the go-to solution is using the appropriate (Alcor Micro Mass Production) utility. This powerful software can reset the controller, perform low-level formatting, and rewrite the firmware. Beyond flash drives, Alcor Micro produces smart card
To bypass this hardware lock, advanced users can force the controller into :
This mechanical bypass breaks the corrupted firmware startup cycle, forcing the microcontroller into a completely generic default state that AlcorMP tools can instantly hook into and re-flash. Remove the needle immediately once the software detects the unit.
The repair process is not always straightforward. Here are some common issues and how to address them. If prompted for a security password, leave the
If the tool is open, it should automatically detect the drive in one of the status boxes. It will likely display the exact Unknown FA00 F/W 3613 or a similar error status. Configure Setup (Optional but Recommended):
Alcor Micro is a dominant manufacturer of controllers used in USB flash drives and SD card readers (notably SanDisk and various generic brands).
The Alcor Micro Unknown FA00 F/W 3613 represents neither a defect nor a counterfeit; it identifies a legitimate Alcor Micro controller running specific firmware optimized for a particular NAND flash configuration. Understanding this identifier empowers users to properly diagnose, maintain, and recover their USB storage devices.
After hours of trial and error with unofficial firmware, he finally found a match. He loaded the ALCOR MP software, set the configuration to "Factory Mode," and hit start. The status bar crawled for nearly three hours as the software "stitched" the 64GB drive back together.