Adjustment Program Reset | Epson R290

If you're experiencing any of these issues, an adjustment program reset can help resolve them by:

Before attempting to perform an adjustment program reset, make sure you have the following:

The official solution is to send the printer to an authorized service center for pad replacement and counter reset. However, due to the R290's age and the prevalence of CISS systems, the practical solution is using the . This proprietary service tool bypasses the lockout, resets the counters, and performs deeper adjustments. adjustment program reset epson r290

The alternating red lights should now be gone, and the green power light should remain solid, indicating that your printer is successfully reset and ready to use. Important Hardware Maintenance Warning

Incorrect destination can cause the reset to fail or write wrong firmware parameters, leading to incorrect ink level monitoring or paper size errors. If you're experiencing any of these issues, an

Connect your Epson R290 directly to your computer using a standard USB cable. (Do not use a Wi-Fi connection or a USB hub). Turn the printer on.

Click the "Check" button. A pop-up will confirm the waste counter value. Click "OK" to see the numbers. Typically, you will see a high value (e.g., "Point: 15000" and "%: 100"), indicating the counter is full. The alternating red lights should now be gone,

If your Epson Stylus Photo R290 printer has suddenly stopped printing, flashing its red lights alternately, you are likely facing a "service required" error. This common issue occurs when the printer's internal waste ink pad counter reaches its maximum limit. Instead of paying for an expensive repair or throwing away a perfectly good photo printer, you can resolve this issue yourself.

Leave the Port selection on or manually select the USB port marked with your printer's name, then click OK .

If you are comfortable disassembling the printer base, you can remove the saturated foam pads, wash them thoroughly under running tap water, squeeze them dry, and reinstall them.

The Epson R290 Adjustment Program is the only direct way to reset the waste ink counter at home. However, its power comes with responsibility.